[1] Yong Wan, Shan Gao, Menghua Li, et al. Enrichment characteristic of carbon atoms in solid-liquid zone of high carbon steel under different directional solidification rates [J]. China Foundry, 2021, 18(5): 488-496. (SCI) [2] Yong Wan, Kongkong Feng, Liqiang Zhang, et al. Dynamic recrystallization behavior and texture evolution of as-cast Fe-4.53%Si non-oriented electrical steel during hot compression[J]. Metallurgical Research & Technology, 2021, 118(5): 509. (SCI) [3] Yong Wan*, Qingqing Zhao, Yichao Wu, et al. Effect of Si content on the formation of {100} <uvw> orientation in 0.27% Al non-oriented electrical steel during cell-to-dendrite transition process[J]. Journal of Materials Engineering and Performance, 2020, 29(5): 3030–3039. (SCI) [4] Yong Wan*, Kongkong Feng, Qingqing Zhao, et al. Effects of Al content and solidification rate on the crystal orientation of directionally solidified 1.3 wt% Si non-oriented electrical steel[J]. Materials Research Express, 2019, 6(11): 1165b4. (SCI) [5] Yong Wan*, Menghua Li, Liangjun Chen, et al. Effect of final electromagnetic stirring parameters on central cross-sectional carbon concentration distribution of high carbon square billet. Metals, 2019, 9(6): 1-16.(SCI) [6] Yong WAN*, Weiqing CHEN, Qingqing ZHAO. Effect of Ag content on the microstructure and magnetic properties of grain-oriented silicon steels[J]. ISIJ International, 2016, 56(4): 661-668. (SCI) [7] WAN Yong*, WU Shao-jie, LI Jie. Effects of complex trace elements on the microstructure and magnetic properties of non-oriented electrical steels[J]. Metallurgical Research & Technology, 2016, 113(1): 101-109. (SCI) [8] Yong Wan*, Weiqing Chen. Effect of boron content on the microstructure and magnetic properties of non-oriented electrical steels [J]. Journal of Wuhan University of Technology(Materials Science), 2015, 30(3): 574-579. (SCI) [9] Yong Wan*, Weiqing Chen, Shaojie Wu. Effects of lanthanum and boron on the microstructure and magnetic properties of non-oriented electrical steels [J]. High Temperature Materials and Processes, 2014, 33(2): 115-121. (SCI) [10] Yong Wan*, Weiqing Chen, Shaojie Wu. Effect of lanthanum content on microstructure and magnetic properties of non-oriented electrical steels [J].Journal of Rare Earths, 2013, 31(7): 727-733. (SCI) [11] Yong Wan*, Weiqing Chen, Shaojie Wu. Effect of cooling rate on the microstructure and precipitates of directional solidified 50W600 non-oriented silicon steel [J]. High Temperature Materials and Processes, 2013, 32(6): 597-603. (SCI) [12] Liangjun Chen, Yong Wan, Yunjin Xia, et al. Dephosphorisation of hot metal containing moderate amounts of chromium with CaO–FeOx–Cr2O3–CaF2 slag[J]. Ironmaking & Steelmaking, 2021, 48(7): 868-877.(SCI) [13] Haimeng Xue, Jie Li, Yunjin Xia; Yong Wan, Liangjun Chen, Changji Lv. Mechanism of phosphorus enrichment in dephosphorization slag produced using the technology of integrating dephosphorization and decarburization[J]. Metals, 2021, 11(2): 216.(SCI) [14] Liangjun Chen, Yong Wan, Jie Li, et al. A new method for plasticization of inclusions in saw-wire steel by NaF addition. [J]. Metals, 2020, 10(6): 704.(SCI) [15] Hongbo Pan, Jinghua Cao, Yong Wan*, Huiting Wang. An investigation on microstructure evolution and mechanical properties of cryogenic steel rebars under different cooling conditions[J].. Materials Research Express, 2019, 6(10): 592-609. (SCI) [16] Hongbo Pan, Yong Wan, Huiting Wang, et al. An investigation of friction coefficient on microstructure and texture evolution of interstitial-free steel during warm rolling and subsequent annealing[J]. Crystals, 2019, 9(10): 565. (SCI) [17] 万勇*, 陈伟庆, 吴绍杰. 铸坯热装温度对无取向硅钢中AlN和MnS析出行为的影响[J]. 北京科技大学学报, 2013, 35(8): 1007-1014. (EI) [18] 万勇*, 吴绍杰, 陈伟庆. 终轧温度对50W600无取向硅钢组织、织构和电磁性能的影响[J]. 金属热处理, 2015, 40(9): 135-140. [19] 万勇*, 吴绍杰, 陈伟庆, 李杰. 卷曲温度对无取向硅钢组织结构及其变化的影响[J]. 过程工程学报, 2014, 14(6): 1047-1052. [20] 万勇*, 陈伟庆, 吴绍杰. 50W600无取向硅钢钙处理的热力学分析及实验研究[J]. 上海金属, 2014, 36(1): 37-41. [21] 万勇*, 吴绍杰, 陈伟庆. 两对二冷电磁搅拌对无取向硅钢铸坯等轴晶率和热轧板组织的影响[J]. 钢铁钒钛, 2014, 35(5): 103-109. [22] 万勇*, 陈伟庆. 凝固速率对定向凝固50W600无取向硅钢固液界面稳定性和枝晶间距的影响. 金属热处理, 2013, 38(11): 63-66. [23] 万勇*, 陈伟庆, 吴绍杰. 钙和硼对无取向硅钢退火冷轧板组织和磁性能的影响[J]. 特殊钢, 2013, 34(5): 64-67. [24] 苏梁, 陈良军, 李杰, 万勇.含铬铁水脱磷的研究进展[J]. 材料导报, 2022,36(07):219-226. [25] 凌霄, 马冬, 冯孔孔, 高山, 温永红, 万勇, 陈其伟, 钱立宏, 疏宇进. 高镍球墨铸铁排气歧管裂纹的形成机理[J]. 材料与冶金学报, 2022,21(03): 189-194. [26] 孙乐飞, 帅勇, 郭文波, 林挺, 操瑞宏, 万勇*, 温永红. C36船板钢铸坯角部横裂和高温热塑性分析及改进工艺[J]. 特殊钢, 2022, 43(3): 64-68. [27] 操瑞宏, 王学林, 孙乐飞, 李杰, 李孟华, 万勇*. LF精炼脱氧方式对钢中氧含量和夹杂物演变规律的影响[J]. 炼钢, 2019, 35(5): 30-36. [28] 操瑞宏, 孙乐飞, 李杰, 王学林, 吴义超, 万勇*. 16MnDR容器钢120t LF-RH-CC过程的洁净度研究[J]. 上海金属, 2019, 41(5): 81-86. [29] 孙乐飞, 吴义超, 王学林, 操瑞宏, 傅清霞, 万勇*. 120t BOF-LF-CC炼钢过程60钢洁净度的试验研究[J]. 特殊钢, 2019, 40(3): 13-18. [30] 刘辉杰, 万勇, 赵和明, 等. 100t LF精炼渣碱度和Al2O3含量对65Mn钢夹杂变质和去除效果的影响[J]. 特殊钢, 2017, 38(4): 38-42. [31] 刘辉杰, 万勇, 冯小明, 等. 硼对65钢连续冷却转变行为的影响[J]. 上海金属, 2017, 39(6): 14-18. [32] 吴绍杰, 万勇, 于彦冲, 陈伟庆. 二冷电磁搅拌对无取向硅钢连铸坯质量的影响[J]. 炼钢, 2012, 28(1): 11-14. [33] 吴绍杰, 万勇, 陈伟庆, 于彦冲. 210tBOF-RH-CC 炼钢过程无取向硅钢XG800WR洁净度的试验研究[J]. 特殊钢, 2011, 32(5): 56-59. [34] 李杰, 梁鹏, 王志, 夏云进, 万勇, 陈良军. CaO-SiO2-Fe2O3-Al2O3渣系对高磷铁水脱磷行为的影响[J]. 安徽工业大学学报(自然科学版), 2019, 36(3): 206-211. [35] 王杰, 夏玉华, 万勇, 范鼎东. 新标热轧带肋钢筋的研制[J]. 河北冶金, 2019, 287: 31-35. [36] 刘红飞, 于彦冲, 张志萍, 万勇, 程晓农. 不同淬火工艺制备ZrW2O8及其负热膨胀性能研究[J]. 硅酸盐通报, 2008(04): 663-666. [37] 万勇, 李杰, 范鼎东, 龙红明. 冶金工程概论课程教学改革探索[J]. 安徽工业大学学报(社会科学版),2016,33(03):55-56. [38] 张超杰, 张立强, 王海川, 龙红明, 万勇.现代科学技术概论课程建设探索[J]. 安徽工业大学学报(社会科学版), 2022, 39(01): 83-85. [39] 张立强, 张超杰, 王海川, 龙红明, 万勇. 新工科背景下冶金工程专业改造升级的探索与实践[J].安徽工业大学学报(社会科学版), 2021, 38(05): 85-86. [40] 赵晴晴, 朱婷婷, 万勇. 工科留学生专业课教学形成性评价体系探索——以安徽工业大学为例[J]. 中国多媒体与网络教学学报(上旬刊), 2020(08): 77-79. [41] 孟庆民, 张立强, 龙红明, 李杰, 王海川, 孔辉, 杨建, 万勇. 基于培养解决复杂工程问题能力的实验教学改革研究[J]. 安徽工业大学学报(社会科学版), 2017, 34(03): 78-79. |