当前位置: 首页 > 师资队伍 > 教师简介 > 正文

钟丽萍

时间:2021-09-14 浏览量:

钟丽萍

博士,资格副教授,硕士生导师

办公地点:冶金楼南403

电子邮件:lp.zhong@ahut.edu.cn

/ 本科生课程

金属学与热处理、现代电子显微分析、科技论文写作

/ 科研方向

轻合金组织调控与强韧化;

外场耦合作用下轻合金组织演变与表征;

高强高导热镁合金的开发及其机理研究;

轻合金塑性变形的机理研究;

镁合金耐腐蚀性能研究。

/   

 

201612月毕业于重庆大学,获得工学博士学位。20171月至20207月,工作于四川轻化工大学。20208月,以资格副教授全职加盟安徽工业大学冶金工程学院。至今主持省部级项目3项,参与国家自然科学基金1项。在Journal of Magnesium and AlloysJournal of Materials Science & TechnologyJournal of Alloys and CompoundsMaterials & DesignMaterials CharacterizationTrans. Nonferrous Met. Soc. China等期刊以第一作者/通讯作者发表高水平学术论文10余篇,授权国家发明专利5项。

/   

 

[1] Liping Zhong, Yongjian Wang, Yuchen Dou. On the improved tensile strength and ductility of Mg–Sn–Zn–Mn alloy processed by aging prior to extrusion. Journal of Magnesium and Alloys, 2019, 2019, 7:637-647.                                                           

[2] Liping Zhong, Yongjian Wang. Microstructure evolution and optimum parameters analysis for hot working of new type Mg−8Sn−2Zn−0.5Cu alloy. Transactions of Nonferrous Metals Society of China, 2019, 29(11): 2290-2299.                                                    

[3] Liping Zhong, Yongjian Wang, Hong Luo, Xuejun Cui, Yingjun Zhang, Baojie Dou, Jian Peng. Influence of aging prior to extrusion on the microstructure and corrosion resistance of Mg-8Sn-2Zn-0.2Mn alloy. Journal of Alloys and Compounds, 2019, 780: 783-791.        

[4] Liping Zhong, Yongjian Wang, Hong Luo, Changsen Luo, Jian Peng. Evolution of the microstructure, texture and thermal conductivity of as-extruded ZM60 magnesium alloy in pre-compression. Journal of Alloys and Compounds, 2019, 775:707-713.             

[5] Liping Zhong, Yongjian Wang, Min Gong, Xingwen Zheng, Jian Peng. Eects of precipitates and its interface on thermal conductivity of Mg–12Gd alloy during aging treatment. Materials Characterization, 2018,138:284-288.                                     

[6] Liping Zhong, Jian Peng, Min Li, Yongjian Wang, Yun Lu, Fusheng Pan. Effect of Ce addition on the microstructure, thermal conductivity and mechanical properties of Mg–0.5Mn alloys. Journal of Alloys and Compounds, 2016, 661: 402-410.                              

[7] Liping Zhong, Jian Peng, Song Sun, Yongjian Wang, Fusheng Pan. Microstructure and thermal conductivity of as–cast and as-solutionized binary Mg–rare earth alloys. Journal of Materials Science & Technology, 2017, 33(11): 1240-1248.                              

[8] Liping Zhong, Jian Peng, Yong Sun, Yongjian Wang, Yun Lu, Fusheng Pan. Microstructure and thermal conductivity of as–cast and as-extruded binary Mg–Mn alloys. Materials Science and Technology, 2017, 33(1): 92-97.                                         

[9] Y.J. Wang, L.P. Zhong*, Y.C. Dou, X.F. Zhang. Revealing grain structure development and texture evolution during elastic stress-assist aging of Mg–Zn alloys. Journal of Alloys and Compounds 2021, 881: 160474.

[10] Y.J. Wang, L.P. Zhong*, Y.C. Dou, Z.Y. Huang. Enhanced age hardening response and precipitation evolution of elastic stress aged Mg–Zn alloys. Journal of Alloys and Compounds 2021, 860: 158513.

[11] Jian Peng, Liping Zhong, Yongjian Wang, Jiang Yang, Yun Lu, Fusheng Pan. Effect of Ce addition on thermal conductivity of Mg-2Zn-1Mn alloy. Journal of Alloys and Compounds, 2015, 639: 556-562.                                                                

[12] Jian Peng, Liping Zhong, Yongjian Wang, Yun Lu, Fusheng Pan. Effect of extrusion temperature on the microstructure and thermal conductivity of Mg–2.0Zn–1.0Mn–0.2Ce alloys. Materials & Design, 2015, 87: 914-919.                                             

[13] Yongjian Wang, Jian Peng, Liping Zhong. On the microstructure and mechanical property of as-extruded Mg-Sn-Zn alloy with Cu addition. Journal of Alloys and Compounds, 2018, 744:234-242.      

/ 专  利

 

[1] 一种高导热变形镁锡合金的制备方法及产品;钟丽萍,王永建,豆雨辰;专利号:ZL201910100690.0

[2] 一种非稀土高强变形镁合金及其制备方法钟丽萍,王永建,龚敏,罗宏,罗昌森,曾宪光,专利号:ZL2017104236430                                    

[3] 一种高强耐腐蚀变形镁合金及其制备方法;钟丽萍,龚敏,郑兴文,金永中,李明田,刘春海,王永建,专利号:ZL2017104236430                          

[4] 一种中高温环境下使用的高热导率镁合金及其制备方法;潘复生,钟丽萍,王永建,杨江,彭建;专利号:ZL201510091356.5                                    

[5] 一种导热镁合金及其制备方法;彭建,钟丽萍,王永建,潘复生;专利号ZL201410414270.7

/ 科研项目

 

[1] 安徽省自然科学基金青年项目:利用孪晶与析出相的交互作用调控镁锡合金热导率的机理研究(No. 2108085QE185),2021.1-2022.12,主持,在研。

[2] 四川省科技厅应用基础研究项目:预变形诱导析出相协同调控镁合金热导率的机理研究(No.2019YJ0478)2019.1-2021.12,主持,在研。

[3] 材料腐蚀与防护四川省重点实验室项目:Ca元素及挤压变形处理对Mg-Sn-Zn系合金腐蚀行为影响的研究(No.2017CL06)2017.04-2019.3主持,已结题

 

电话:0555-2311571 E-mail:yjxy@ahut.edu.cn

地址:安徽省马鞍山市马向路1530号秀山校区冶金楼 邮编:243032