当前位置: 首页 > 师资队伍 > 教师简介 > 正文

夏文真

时间:2021-04-23 浏览量:

夏文真

博士,教授

办公地点:冶金楼南315

电子邮件:w.xia@ahut.edu.cn

/ 本科课程

《塑性加工原理》等

/ 研究生课程

《科技论文与专利撰写规范》

/ 科研方向

[1] 金属材料微观摩擦;

[2] 微纳力学;

[3] 微观组织结构表征;

[4] 金属材料加工与组织性能控制;

[5] 高熵合金;

/   

 

201712月毕业于澳大利亚伍伦贡大学,获得博士学位。20181月至20211月,在德国马普钢铁研究所从事博士后工作。20213月,以学术带头人层次教授职称加盟安徽工业大学冶金工程学院。20214月成立“微纳组织与力学研究所”并担任该研究所负责人。至今在Nature CommunicationsActa MaterialiaMaterials and Design等期刊上发表了学术论文20余篇,参与编写美国金属协会手册一本

/   

 

[1] Wenzhen Xia*, Piyush Pramod Patil, Chang Liu, Gerhard Dehm, Steffen Brinckmann*. A novel microwall sliding test uncovering the origin of grain refined tribolayers. Acta Materialia, 246(2023):118670.

[2] Wenzhen Xia*, Gerhard Dehm, Steffen Brinckmann*. Investigation into plastic flow and friction during single asperity microscratch in an austenitic steel. Wear, 452-453(2020): 203289.

[3] Wenzhen Xia*, Gerhard Dehm, Steffen Brinckmann*. Insight into indentation induced plastic flow in austenitic stainless steel. Journal of Materials Science, 55(2020): 9095–9108.

[4] Hanna Tsybenko*, Wenzhen Xia*, Gerhard Dehm, Steffen Brinckmann*. On the commensuration of plastic plowing at the microscale. Tribology International, 151 (2020): 106477.

[5] Wenzhen Xia*, Gerhard Dehm, Steffen Brinckmann*. Unraveling indentation-induced slip steps in austenitic stainless steel. Materials & Design, 183(2019): 108169.

[6] Wenzhen Xia, Jingwei Zhao, Hui Wu, Xianming Zhao, Xiaoming Zhang, Jianzhong Xu, Sihai Jiao, Xiaogang Wang*, Cunlong Zhou, Zhengyi Jiang*. Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles in hot rolling of 304 stainless steel. Journal of Materials Processing Technology, 262(2018): 149-156.

[7] Wenzhen Xia, Jingwei Zhao, Hui Wu, Sihai Jiao, Xianming Zhao, Xiaoming Zhang, Jianzhong Xu, Zhengyi Jiang*. Analysis of oil-in-water based nanolubricants with varying mass fractions of oil and TiO2 nanoparticles, Wear, (396-397)2018162-171.

[8] Wenzhen Xia, Jingwei Zhao, Xiawei Cheng, Jingna Sun, Hui Wu, Yi Yan, Sihai Jiao, Zhengyi Jiang*. Study on growth behaviour of oxide scale and its effects on tribological property of nano-TiO2 additive oil-in-water lubricant, Wear, 376(2017): 792-802.

[9] Wenzhen Xia, Jingwei Zhao, Hui Wu, Sihai Jiao, Zhengyi Jiang*. Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles on the tribological behaviour of oxidised high-speed steel, Tribology International, 110 (2017): 77-85.

[10] Wenzhen Xia, Jingwei Zhao, Hui Wu, Xianming Zhao, Xiaoming Zhang, Jianzhong Xu, Ay Ching Hee, Zhengyi Jiang*. Effects of nano-TiO2 additive in oil-in-water lubricant on contact angle and antiscratch behavior. Tribology Transactions, 60 (2017): 362-372.

[11] Wenzhen Xia, Xianming Zhao, Xiaoming Zhang, Di Wu. Effects of offline relaxation quenching on microstructure and mechanical properties of a newly designed high performance steel. Journal of Iron and Steel Research, International, 21 (2014): 459-463.

[12] Chang Liu, Wenjun Lu, Wenzhen Xia, Chaowei Du, Ziyuan Rao, James P. Best, Steffen Brinckmann, Jian Lu, Baptiste Gault, Gerhard Dehm, Ge Wu*, Zhiming Li*, Dierk Raabe*. Massive interstitial solid solution alloys achieve near-theoretical strength. Nature communications 13.1 (2022): 1-9.

[13] Chang Liu*, Zhiming Li, Wenjun Lu, Yan Bao, Wenzhen Xia, Xiaoxiang Wu, Huan Zhao, Baptiste Gault, Chenglong Liu, Michael Herbig, Alfons Fischer, Gerhard Dehm, Ge Wu*, Dierk Raabe*. Reactive wear protection through strong and deformable oxide nanocomposite surfaces. Nature communications 12.1 (2021): 1-8.

[14] Ge Wu, Chang Liu, Andrea Brognara, Matteo Ghidelli*, Yan Bao, Sida Liu, Xiaoxiang Wu, Wenzhen Xia, Huan Zhao, Jing Rao, Dirk Ponge, Vivek Devulapalli, Wenjun Lu*, Gerhard Dehm, Dierk Raabe*, Zhiming Li*. Symbiotic crystal-glass alloys via dynamic chemical partitioning. Materials Today 51 (2021): 6-14.

[15] Ge Wu, Shanoob Balachandran, Baptiste Gault, Wenzhen Xia, Chang Liu, Ziyuan Rao, Ye Wei, Shaofei Liu, Jian Lu, Wenjun Lu*, Gerhard Dehm, Zhiming Li*, Dierk Raabe*. Crystal-glass highentropy nanocomposites with near theoretical compressive strength and large deformability. Advanced materials, (2020): 2002619.

[16] Shyam Katnagallu, Ge Wu, Shiv Prakash Singh, Sree Harsha Nandam, Wenzhen Xia, Leigh T. Stephenson, Herbert Gleiter, Ruth Schwaiger, Horst Hahn, Michael Herbig, Dierk Raabe, Baptiste Gault*, Shanoob Balachandran. Nanoglass–nanocrystal composite – a novel material class for enhanced strength –plasticity synergy. Small, (2020): 2004400.

[17] Zhangwei Wang, Lin Guo, Wenzhen Xia, Zhao Yuan, Yang Cao, Song Ni, Min Song*. An SEM-based approach to characterize the microstructural evolution in a gradient CoCrFeNiMo0.15 high-entropy alloy. Materials Characterization, (2020):110169.

[18] Hui Wu, Jingwei Zhao, Wenzhen Xia, Xiawei Cheng, Anshun He, Jung Ho Yun, Lianzhou Wang et al. A study of the tribological behaviour of TiO2 nano-additive water-based lubricants. Tribology International, 109 (2017): 398-408.

[19] Hui Wu, Jingwei Zhao, Wenzhen Xia, Xiawei Cheng, Anshun He, Jung Ho Yun, Lianzhou Wang et al. Analysis of TiO2 nano-additive water-based lubricants in hot rolling of microalloyed steel. Journal of Manufacturing Processes, 27 (2017): 26-36.

[20] Hui Wu, Jingwei Zhao, Xiawei Cheng, Wenzhen Xia, Anshun He, Jung Ho Yun, Shuiquan Huang et al. Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel. Tribology International, 117(2018): 24-38.

[21] Xiawei Cheng, Zhengyi Jiang, Dongbin Wei, Liang Hao, Hui Wu, Wenzhen Xia, Suzhen Luo, Laizhu Jiang. Effects of surface preparation on tribological behaviour of a ferritic stainless steel in hot rolling. Wear, 376(2017): 1804-1813.

[22] Feijun Qu, Zhengyi Jiang, Wenzhen Xia. Evaluation and optimisation of micro flexible rolling process parameters by orthogonal trial design. The International Journal of Advanced Manufacturing Technology, 95(2018): 143-156.

/ 科研项目

 

[1] 国家自然科学基金青年项目,微观摩擦条件下奥氏体不锈钢微观组织演变规律及机理,2023-012025-1230万元,主持;

[2] 安徽工业大学高层次人才科研启动项目,2021-032026-12150万元,主持;

[3] 德国科学基金会项目,在纳米摩擦下FCCBCC金属破坏机制研究,参与;

[4] 宝钢澳大利亚联合研发中心项目,新型热轧水油基纳米润滑剂的开发,参与;

[5] 澳大利亚研究理事会和宝钢澳大利亚联合研发中心项目,新型热轧钢铁用水基纳米润滑技术的开发,参与;

[6] 澳大利亚研究理事会探索项目,新型复合微型钻头的微制造及力学研究,参与;

[7] 国家973项目,高性能钢的组织调控理论和技术基础研究,参与;

[8] 台湾中钢项目,热轧钢板控轧与超快冷研究,参与;

[9] 内蒙古包头钢铁项目,重轨在线冷却研究,参与。

/ 教研项目

 

[1] 安徽省教育厅省级传统专业改造提升项目,2022,主持。

/ 奖励荣誉

 

[1] 安徽省科技厅科技项目评审专家,2022

[2] 安徽省115”产业创新团队(成员),2021

[3] 马鞍山市“龙马”工程高层次人才,2021

[4] 澳大利亚伍伦贡大学优秀博士论文奖2018

 

上一篇:陈良军

下一篇:杨建

电话:0555-2311571 E-mail:yjxy@ahut.edu.cn

地址:安徽省马鞍山市马向路1530号秀山校区冶金楼 邮编:243032