当前位置: 首页 >> 师资队伍 >> 正文

侯清宇


发布时间:2019-03-05        浏览:

侯清宇

博士,副教授,硕士生导师

办公地点:冶金楼北414

办公电话:0555-2311571

传真:0555-2311571

电子邮件:houqingyu@ahut.edu.cn

本科生课程:金属学与热处理、金属材料学、材料力学性能

研究生课程:现代显微分析方法

科研方向(1) 金属材料的表面熔覆与喷涂技术

(2) 先进钢铁材料的组织结构和性能控制理论与技术

(3)难熔金属材料的放电等离子体烧结技术

       历:

侯清宇,男,副教授。1973年生,1997年毕业于华东冶金学院金属材料与热处理专业(学士),2003年获得安徽工业大学材料加工工程专业硕士学位,2012年获得南京理工大学材料科学与工程博士学位。自19977月开始至今一直在安徽工业大学任教,主讲过的本科生课程主要有金属学与热处理金属材料学金属力学性能等,已发表SCI/EI收录论文40余篇。

       文:

[1] Qingyu Hou(#)(*), Xiaoyu Ma, RongchengLu, Wei Wang, Ping Wang, Zhenyi Huang(*), Microstructure and laserirradiation characteristics of TiC-free and TiC-doped tungsten-based coatingsprepared by supersonic atmospheric plasma spraying, Surface and Coatings Technology,2019, 358: 796-805.

[2]Qingyu Hou(#)(*), Laima Luo, Zhenyi Huang, Ping Wang,Tingting Ding, Yucheng Wu(*), Lanthanum hydride doped tungsten-basedcoating fabricated by supersonic atmospheric plasma spraying, Surface and CoatingsTechnology, 2016, 299: 153-161.

[3]QingyuHou(#)(*), Laima Luo, ZhenyiHuang, Ping Wang, Tingting Ding, Yucheng Wu(*), Influence of LaH2on oxidation characteristics and irradiation melting characteristics of atungsten coating fabricated by atmospheric plasma spraying. Surface andCoatings Technology, 2016, 299: 143-152.

[4]Qingyu Hou(#)(*), Laima Luo, ZhenyiHuang, Ping Wang, Tingting Ding, Yucheng Wu(*), Comparison of W-TiCcomposite coatings fabricated by atmospheric plasma spraying and supersonicatmospheric plasma sprayingFusion Engineering andDesign, 2016, 105: 77-85.

[5]Qingyu Hou(#)(*), Laima Luo, Zhenyi Huang, Ping Wang, TingtingDing, Yucheng Wu(*), Microstructure andproperties of mixed Cu-Sn and Fe-based alloyswithout or with molybdenum addition processed by plasma transferred arc,Surface & Coatings Technology, 2015, 283: 184-193.

[6]Qingyu Hou(#)(*), Laima Luo, Zhenyi Huang, Ping Wang,Tingting Ding, Yucheng Wu(*), Comparison of three kinds ofMC-type carbide modified thick W coatingsfabricated by plasma transferred arc surfacing, Surface & CoatingsTechnology, 2015, 283: 52-60.

[7]Qingyu Hou(#)(*), Laima Luo, Zhenyi Huang, Ping Wang,Tingting Ding, Yucheng Wu(*), Liquid phase separationmicrostructure and properties of mixed Cu-Sn and Co-base alloys without or withmolybdenum addition processed by plasma transferred arc hardfacing, Surface& Coatings Technology, 2015, 262: 87-96. [8] Qingyu Hou(#)(*), Microstructure and wearresistance of steel matrix composite coating reinforced by multiple ceramicparticulates using SHS reaction of Al-TiO2-B2O3system during plasma transferred arc overlay welding, Surface & CoatingsTechnology, 2013, 226: 113-122.

[9]Qingyu Hou(#)(*),Influence of molybdenum on the microstructure and properties of a FeCrBSi alloycoating deposited by plasma transferred arc hardfacing, Surface & CoatingsTechnology, 2013, 225: 11-20.

科研项目

[1] 安徽省自然科学基金面上项目,1508085ME95TiC掺杂钨基材料的HVOF连续沉积成形及其强韧化特征研究,2015/072017/06,已结题,主持。

[2]中国博士后科学基金面上项目,2014M551796HVOF喷涂成形钨基材料及再结晶与塑性变形机制研究,2014/042016/12,已结题,主持。

[3]国家自然科学基金面上项目,51674004,低密度、高强塑性积钢的强韧化机制与内氧化行为研究,2017/012020/12,在研,第二负责人。

[4] 提高冷轧圆盘剪剪切寿命研究,泰尔重工股份有限公司,2015/042016/03,已结题,主持。

[5] 窄带钢高表面质量/高性能控制关键技术研究与应用,山东钢铁股份有限公司莱芜分公司,2017/10月-2018/12,已完成,主持。

[6] 大棒控轧控冷工艺研究,南京钢铁有限公司,2018/082020/10,在研,主持。

上一条:陈霞 下一条:柏媛媛

关闭

-->