(1) G. Li, G. Xu, R. Sun, S. Liang, J. Li*, M. Zhang, Effect of ageing on precipitation evolution and corrosion behaviour of Al–Zn–Mg–Cu alloy, Materials Science and Technology 39(2) (2023) 177-186.
(2) J. Li, R. Yu, G. Xu, C. Chen, Y. Ha, L. Song, H. Zhang, Research on Hot Deformation Behavior of F92 Steel Based on Stress Correction, Metals 12(5) (2022) 698.
(3) G. Li, W. Rui, G. Xu, M. Zhang, J. Li*, Hot deformation behavior and dynamic softening mechanism for extreme-cooled 7055 aluminum alloy, Applied Physics A 128(3) (2022) 1-13.
(4) G. Li, M. Fang, G. Xu, R. Sun, C. Chen, M. Zhang, J. Li*, Effect of high-temperature ECAP on grain coarsening and refinement, Materials Science and Technology 38(3) (2022) 181-190.
(5) R. Yu, Q. Chen, P. Wang, D. Zhang, J. Li*, M. Zhang, Effects of Solution Temperature and Aging Time on the Microstructure and Mechanical Properties of TG6 Titanium Alloy, Journal of Materials Engineering and Performance 31(2) (2022) 1456-1464.
(6) R. Yu, Q. Chen, X. Zhang, H. Zhang, J. Hao, J. Li*, Constitutive Model and Microstructure Evolution of a Novel TG6 High-Temperature Titanium Alloy during Hot Deformation, Journal of Materials Engineering and Performance 31(1) (2022) 833-848.
(7) J. Li, F. Li, S. Liang, Z. Huang, M. Zhang, Microstructure and mechanical properties of pure Mg after spiral equal-channel extrusion, Materials Science and Technology 37(4) (2021) 384-394.
(8) S. Liang, J. Li*, Q. Zhang, J. Chen, Microstructural Evolution in the TC17 Titanium Alloy Processed During Laser Stereo Forming, Journal of Materials Engineering and Performance 30 (2021) 2967-2976.
(9) J. Zhang, W. Han, Z. Huang, J. Li*, M. Zhang, L. Zhang, Study on microstructure evolution and nanoindentation characteristics of 316 L austenitic stainless steel with inverse gradient grain sizes fabricated via torsion and electro-magnetic induction heating, Materials Characterization 181 (2021) 111462.
(10) J. Li, R. Yu, J. Chen, F. Li, S. Liang, M. Zhang, Influence of load modes on the characteristics of severe plastic deformation based on crystal plasticity finite element method, Journal of Materials Engineering and Performance 30(3) (2021) 1981-1993.
(11) R. Yu, X. Li, W. Li, J. Chen, X. Guo, J. Li*, Application of four different models for predicting the high-temperature flow behavior of TG6 titanium alloy, Materials Today Communications 26 (2021) 102004.
(12) J. Zhang, W. Han, W. Rui, J. Li*, Z. Huang, F. Sui, Effect on corrosion resistance of microstructure of 316L austenitic stainless steel subjected to combined torsion–tension deformation, International Journal of Materials Research 111(5) (2020) 405-415.
(13) J. Zhang, W. Han, W. Rui, J. Li*, Z. Huang, F. Sui, Deformation mechanisms of 316L austenitic stainless steel tubes under equal channel angular pressing, Journal of Materials Engineering and Performance 29 (2020) 1253-1261.
(14) J. Zhang, Z. Huang, W. Rui, J. Li*, Y. Tian, J. Li, Effect of combined torsion and tension on the microstructure and fracture behavior of 316L austenitic stainless steel, Journal of Materials Engineering and Performance 28 (2019) 5691-5701.
(15) J. Li, F. Li, J. Li, S. Liang, Crack‐induced intergranular corrosion behavior of aerial aluminum alloy subjected to severe plastic deformation, Materials and Corrosion 70(2) (2019) 234-245.